Next, let’s go over the daily maintenance and operational precautions for industrial dust collectors.

Release time:

2022-04-20

1. If the pulse valve malfunctions during the operation of an industrial dust collector, it should be promptly diagnosed, repaired, or replaced. If there are impurities or moisture inside the equipment, they should be cleaned out promptly. If the diaphragm is damaged, it should be replaced without delay. 2. The mechanical moving parts in the dust collector, such as the reducer and ash-discharge device, should be lubricated and maintained according to schedule. Any abnormal operating conditions detected should be addressed promptly.

　　Next, let’s go over the daily maintenance and operational precautions for industrial dust collectors.

　　Precautions for Daily Maintenance and Operation of Industrial Dust Collectors:

　　1. If the pulse valve malfunctions during the operation of an industrial dust collector, it should be promptly diagnosed, repaired, and replaced. If there are impurities or moisture inside the equipment, they should be cleaned out promptly. If the diaphragm is damaged, it should be replaced immediately.

　　2. The mechanical moving parts in the dust collector, such as the reducer and ash-discharging device, should be lubricated and have their lubricants replaced promptly according to regulations. Any abnormal operating conditions should be promptly addressed and eliminated.

　　3. When the equipment is shut down and the process system has come to a halt, the dust collector and the exhaust fan should continue operating for a certain period of time to maintain the dust collection efficiency within the workshop. After the dust collector is stopped, it must be thoroughly cleaned repeatedly to ensure that any moisture and dust adhering to the filter bags are removed. Failure to do so could adversely affect the equipment’s service life, performance, and operating conditions. Therefore, operators should become proficient in the adjustment and maintenance procedures for industrial dust collectors.

　　5. The oil-water separator in the gas storage tank and the air-source three-in-one unit should be drained once per shift. The oil-water separator should be cleaned every 3 to 6 months. The oil mist injector should be regularly checked for oil levels, and oil should be added promptly as needed.

　　What are the operational precautions for industrial baghouse dust collectors?

　　To effectively achieve environmental protection goals, major enterprises now commonly use professional dust collectors. While this helps attain better purification results, many people still aren't quite clear about how these vacuum cleaners actually work or what precautions should be taken. First, you need to understand the key points to keep in mind when operating baghouse industrial dust collectors. In fact, once you know these points, you'll find that the process is relatively straightforward.

　　In the process of using baghouse industrial dust collectors, the materials used in the purification device must first meet the required specifications. If the size of the filter bags is too large, they may fail to achieve the desired purification effect during operation; conversely, if the bags are too small, this could compromise the effectiveness of dust control. In addition to these considerations, it’s crucial to ensure that the equipment operates strictly according to the prescribed procedures throughout its entire lifecycle. Only in this way can we guarantee consistent performance for each component. The annular three-dimensional filter layer ensures that the filter media meets the necessary requirements; otherwise, there’s a high likelihood of significant short-circuiting in the flue gas flow, uneven distribution of airflow, and unnecessary additional strain on the dust collector during operation. Therefore, all these factors should be thoroughly understood and taken into account from the very beginning of the operational process.

　　In addition, when using baghouse industrial dust collectors, it is crucial to pay close attention and regularly add fresh coal. This ensures the coal’s activity remains effective. In fact, the adsorption performance of the coal is directly related to the replacement cycle; to effectively meet current conditions, adjustments should also be made according to the cycle.

　　That’s all for today’s explanation. Thank you all for watching. If you’re interested in purchasing or customizing dust collectors, feel free to contact our company.

Jiangsu Yaxing

Address: Qingdun Industrial Park, Hai'an City, Jiangsu Province

Phone: 86-513-88483622 ，86-513-88480666,

86-513-88480999

Fax: 86-513-88482423

Email: yx@ntyxbwg.com